PINE ZIRCONIA

METAL FREE

Product Description

It is a popular type of all-ceramic crown which is worn to improve the appearance of a tooth which has become stained or disfigured over the years. They are durable, easy to wear and long lasting.

It have a translucent appearance which means that they are indistinguishable from your own teeth. It is hard to spot a zirconia crown amongs natural teeth.

Zircon- is a bio-compatible materials that is know to withstand tremendous mastication force. Its translucent properties gives it aesthetic look of natural teeth. Its under-structure is made by CAD/CAM technology, a process during which the pinned and sectioned model is scanned with 3D Optical Scanner, designed through computer and restoration milled in pre-sintered zirconia block. The milled frame is sintered for 10 hours to fully gain its high strength and fracture resistance. Finally pre-blended ceramic is pressed over the zirconium oxide under structure and its available for flourascent shade, 7-effect shade and all vita shades.

PINE ZIRCONIA is classified into:

v Pine Zirconia Premium Plus

v Pine Zirconia Premium

v Pine Zirconia Classic

v Pine Zirconia Basic

v Pine Zirconia Premium Plus Full Contour

v Pine Zirconia Premium Full Contour

v Pine Zirconia Classic Full Contour

v Pine Zirconia Basic Full Contour

v Pine Zirconia Translucent

v Pine Zirconia Monolithic

Benefits

v Natural Translucency and excellent aesthetic

v Highly Bio - compatible

v Perfect marginal fit modifitable size, shape and color

v Less tooth removal

Indications

v Single Crown

v Up to 16 unit bridge

v Implant prosthesis

v In bridges up to 8 units can give 4 continuous pontics in anterior and 2 in posterior regions

v In bridges more than 8 units, it is ideal to have more than continuous pontics in both anterior and posterior region.

v 1 cantilever possible with at least 2 continuous abutments (distal cantilever not advisable; avoid cantilever in canine and molar)

v Primary telescopes

v Custom zirconia abutment for a wide variety of implant systems

Terms & Conditions

v Warranty regarding extension, retention, occlusion, contact etc. is only on the basis of the given model.

v All repetitions and correction should be informed within 7 days and will be accepted only with fresh models along with initially supplied model, work and warranty card.

v To claim warranty of Pine Dental prosthesis, the patient should consult the same doctor or clinic.

v Repetitions will be charged at 50% of the actual rate of the work and additional tax, if any.

v Patient cannot claim warranty in the pricelist will not have any warranty.

Request:

v Ensure giving temporary crown or bridge after tooth preparation. We won’t be responsible for problems in insertion, if temporary crown or bridge is not given.

v An order placed, cannot be withdrawn.

v We need 7 working days to complete a work except Friday and other holidays.

Urgent Orders

v Will be charge 10% extra. The fabrication time depends on prosthesis type and unit.

Suggestion

v The proximal margins of the abutments should be parallel or slightly tapering towards occlusal surface. Eliminate undercuts to the maximum. Round all corners.

v We always prefer perfect rubber base impression. Don’t pour die stone type IV immediately to the rubber base impression. Pour only after 1 hour.

v Don’t allow the alginate impression to get dried. Pour die stone type IV immediately. If the model thus prepared is found defective (air bubble, broken stump etc.) discard it and take a new impression rather than trying to produce a second model from the old alginate impression.

v We need upper and lower full Die Stone IV models to check the occlusion correctly.

v Provide the bite registration in Silicone putty (not in wax), if necessary.

v The shade will be perfect only if the labial and occlusal clearance is 2mm.

v VITA classical and VITA 3D Master 9of Ivoclar A-D shade number should be given for ceramic shade selection.

v Avoid grinding the metal prosthesis at the time of metal trial. This may lead to contamination of metal and ceramic chipped-off.

v In anterior cases, if patient is satisfied with the temporary crown / bridge, kindly provide a model of that which will help us in imitating the shape and arrangement. Pre - operative models will also be useful in some cases.